基本参数
品牌: |
宏越 |
型号: |
1530 |
额定电压: |
380V |
额定输入功率: |
380V |
规格: |
1500*3000 |
产地: |
山东 |
产品类型: |
全新 |
产品认证: |
CE |
电源电压: |
380V |
电源类型: |
交流电源 |
工作形式: |
全自动 |
回转数: |
全自动 |
加工定制: |
是 |
空载转速: |
24000rpm |
控制方式: |
数控 |
适用范围: |
金属非金属 |
执行标准: |
国标 |
主轴钻速: |
24000rmp |
最大加工宽度: |
1500 |
|
|
性能特点/Performance characteristics:
◆采用大功率电主轴,驱动系统采用伺服电机。
High-power spindle and servo motors are used in this machine
◆智能保护工作台面:防止误操作,或软件错误等可能造成的台面损坏。智能加工越界保护,防止设计版面超过加工幅面引起的机械碰撞现象。
Intelligent protecting function of machine table:to avoid the table breakdown caused by the faulty operation,or software error.Intelligent processing cross-border protection to prevent mechanical collision caused by the design layout exceeding the processing width.
◆智能控制系统,自动完成多重层面3D加工。能够进行快速、平滑的雕刻或切割。可实现脱机操作。
Intelligent control system, automatic multi-level 3D processing.It can engrave or cut quickly and smoothly. Offline operation can be realized.
◆台湾直线导轨,自润滑块。雕刻时各方向受力均等,保证了机械精度和强度。
Taiwan linear guide, self-lubricating block. The mechanical accuracy and strength are guaranteed by equal force in all directions during carving.